Welcome to MistHub’s Guide to Tank Maintenance and Troubleshooting. Here we will discuss how to perform routine maintenance on your own tank atomizers to keep them functioning in good shape. We will also review some common problems and their solutions. First, let’s check out the best way to properly use a completely new tank or perhaps a new coil you just placed in your tank.
Whenever you use a new coil you will want to just be sure you prime it before making use of it. Priming a coil will assure that this wick in it is saturated with e-juice just before its first use. This substantially lowers the potential of burning your wick or damaging your coil. To prime your coil you will need to place 4-5 drops of e-juice into the coil head. Install the coil head by threading it to the tank’s base. You’ll then fill and assemble your tank. For optimum results you must wait 5-10 minutes before its first use. Should you be in a big hurry and can’t wait the 5-10 minutes you must at least wait 1-2 minutes, close the flow of air and take several deep pulls without firing your device. You should be able to then re-open the airflow and use the tank normally without issue.
While it might appear just like a complex task to help keep your tank properly it really is quite easy. First of all you should keep it clean. At least once 30 days clean your tank. Start by taking out the coil(s) and then any O-rings. While taking out the O-rings search for warning signs of wear or any cracks. When the any O-rings are damaged, replace them. Clean your tank thoroughly using isopropyl alcohol or domestic hot water along with a mild dish soap for both the lining and out. Make sure to pay special attention to the threads (a vintage toothbrush can help because of this part). Be sure you wash your O-rings at the same time. Rinse rid of it, then rinse it again just to make certain there’s no soap or residue forgotten. As soon as your ijoy is entirely dry you’re to reassemble and employ it again.
The most common issue tank users are presented with is leaks. A leaky tank could be a real inconvenience but typically they may be relatively easy to correct. 99 percent of the time an army tank is leaking because it’s letting air in somewhere which breaks the vacuum that holds your e-liquid inside the tank. First, make tank apart inspecting all glass or plastic parts looking for any cracks. Should you not use whatever, check the O-rings for signs and symptoms of damage or cracks. If any of the above mentioned parts are damaged at all replace them as needed. Make sure to check and make certain the coil head is fully threaded in place but isn’t overly tight. It ought to be easily removable without tools. When it is too tight it might have damaged the O-ring(s) on the base from the coil or pushed them unnatural. When the O-rings on the coil are damaged replace them or entire coil. In the event the tank will continue to leak as well as these continues to be checked additionally, it can be related to a bad coil head. As time passes and thru utilize the wicking materials can stop working and not hold the maximum amount of juice since they once did. This will cause deficiencies in surface tension allowing air to sneak in from the coil in that case it must be changed.
More info about smoktech have a look at our new web page: click for more info