September 2017 – Page 137 – Things you did not know about street jingle in New Bury

Nishant Sudhakaran From India Sculpts a work of art Scrap Metal Ganesha Idol!

Posted by Brandy Vigil on September 1, 2017 in Writing and Speaking 0 Comment

With a strong family belief in Lord Ganesha, this coming year ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to generate a six foot Ganesha idol with automobile scraps.

A professional in creating sculptors out of metal scrap, whenever a client approached Nishant to make one among Lord Ganesha, he couldn’t resist. He believes his new born daughter is definitely an reply to his prayers to Ganpati/ Ganesha, he believed this came as a possible possibility to express the romance towards the higher power.

Go through the youtube url for the scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

Regardless of the short notice, a job that needs a commitment of nearly 60 – 70 days, he completed this magnificent piece inside a month. Tirelessly morning and night with his team, he admits that “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts had to be handpicked in order that they could fit in just like a jigsaw puzzle. The most challenging and challenging part was the operation of hammering and bending the various to give the desire type of our bodies. Sourcing flat parts from various vendors included with the challenge of executing the task at the deadline, which however we been able to accomplish.

A 6 feet in height “The Lord Ganesha” sculpture, it’s made purely from various automobile scrap parts. These parts are almost Ten to fifteen mm in depth that had been bent & welded together and meticulously shaped to make it a complete metal sculpture. This Ganpati Idol has been given from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts in order to name some. The Mooshak (Mouse/ Undir Mama) is also created from gears, nuts, bolts as well as with a piston block and a wrought iron tail.
With all the 6 foot Ganpati created from automobile scrap for his client, the subsequent project for Nishant can be a ten to eleven foot kinetic wind sculpture.

Contact Detail-
Nishant Sudhakaran
+91 80970 27788 / +91 9920624321
[email protected]
Social media – https://www.facebook.com/leo.metals937
Youtube video: https://youtu.be/cHRFZkrsP0o
Website: https://www.indiamart.com/leoenterprises-mumbai/

Nishant Sudhakaran From India Sculpts a Masterpiece Scrap Metal Ganesha Idol!

Posted by Brandy Vigil on September 1, 2017 in Writing and Speaking 0 Comment

Having a strong family belief in Lord Ganesha, this coming year ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to make a six foot Ganesha idol with automobile scraps.

A specialist in creating sculptors beyond metal scrap, when a client approached Nishant to generate one among Lord Ganesha, he couldn’t resist. He believes his baby baby girl can be an response to his prayers to Ganpati/ Ganesha, he believed this came being an possiblity to express the romance for the higher power.

Click the youtube url for that scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

Despite the short notice, a task that needs dedication of nearly 60 – 70 days, he completed this magnificent piece in a month. Tirelessly morning and night along with his team, he states “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts would have to be handpicked in order that they could fit into as being a jigsaw puzzle. The most difficult and challenging part was the whole process of hammering and bending the parts to get the desire model of one’s body. Sourcing flat parts from various vendors included with the challenge of executing the work at the deadline, which however we was able to accomplish.

A 6 feet in height “The Lord Ganesha” sculpture, it is made purely from various automobile scrap parts. These parts are nearly 10 or 15 mm thick that had been bent & welded together and meticulously shaped to restore a total metal sculpture. This Ganpati Idol has been manufactured from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts just to name a few. The Mooshak (Mouse/ Undir Mama) is also produced from gears, nuts, bolts plus using a piston block as well as a wrought iron tail.
With all the 6 foot Ganpati created away from automobile scrap for his client, the following work for Nishant is often a ten to eleven foot kinetic wind sculpture.

Nishant Sudhakaran From India Sculpts a Masterpiece Scrap Metal Ganesha Idol!

Posted by Brandy Vigil on September 1, 2017 in Writing and Speaking 0 Comment

Using a strong family belief in Lord Ganesha, this season ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to generate a six foot Ganesha idol with automobile scraps.

A specialist in creating sculptors out of metal scrap, each time a client approached Nishant to make certainly one of Lord Ganesha, he couldn’t resist. He believes his baby daughter is definitely an response to his prayers to Ganpati/ Ganesha, he believed this came just as one possibility to express his passion on the higher power.

Click on the youtube url to the scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

Regardless of the short notice, a task that will need dedication of nearly 60 – 70 days, he completed this magnificent piece inside a month. Tirelessly morning and night with his team, he admits that “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts needed to be handpicked so they could fit in like a jigsaw puzzle. The hardest and challenging part was the process of hammering and bending the various to own desire form of one’s body. Sourcing flat parts from various vendors included with the task of executing the job on the deadline, which however we were able to accomplish.

A 6 feet in height “The Lord Ganesha” sculpture, it can be made purely from various automobile scrap parts. These parts are nearly 10-15 mm in depth that had been bent & welded together and meticulously shaped to really make it a complete metal sculpture. This Ganpati Idol has been made from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts only to name just a few. The Mooshak (Mouse/ Undir Mama) can be made from gears, nuts, bolts as well as with a piston block as well as a wrought iron tail.
Using the 6 foot Ganpati created away from automobile scrap for his client, the following problem for Nishant can be a ten to eleven foot kinetic wind sculpture.

Nishant Sudhakaran From India Sculpts a Masterpiece Scrap Metal Ganesha Idol!

Posted by Brandy Vigil on September 1, 2017 in Writing and Speaking 0 Comment

With a strong family belief in Lord Ganesha, in 2010 ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to create a six foot Ganesha idol with automobile scraps.

A specialist in creating sculptors out of metal scrap, whenever a client approached Nishant to create one of Lord Ganesha, he couldn’t resist. He believes his newborn baby girl is definitely an reply to his prayers to Ganpati/ Ganesha, he believed this came just as one possibility to express the love on the higher power.

Go through the youtube url to the scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

Regardless of the short notice, a project that will need dedication of nearly 60 – 70 days, he completed this magnificent piece within a month. Tirelessly time of day and night with his team, he states “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts must be handpicked so they could easily fit in just like a jigsaw puzzle. The most challenging and challenging part was the operation of hammering and bending the parts to give the desire shape of your body. Sourcing flat parts from various vendors included with the task of executing the job in the deadline, which however we were able to accomplish.

A 6 ft . tall “The Lord Ganesha” sculpture, it really is made purely from various automobile scrap parts. These parts are nearly Ten to fifteen mm in thickness which were bent & welded together and meticulously shaped to make it an entire metal sculpture. This Ganpati Idol has been given from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts just to name a few. The Mooshak (Mouse/ Undir Mama) is additionally created from gears, nuts, bolts and in addition which has a piston block plus a wrought iron tail.
With the 6 foot Ganpati created out of automobile scrap for his client, another problem for Nishant can be a ten to eleven foot kinetic wind sculpture.

Nishant Sudhakaran From India Sculpts a work of art Scrap Metal Ganesha Idol!

Posted by Brandy Vigil on September 1, 2017 in Writing and Speaking 0 Comment

With a strong family belief in Lord Ganesha, this year ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to create a six foot Ganesha idol with automobile scraps.

A specialist in creating sculptors away from metal scrap, each time a client approached Nishant to create one among Lord Ganesha, he couldn’t resist. He believes his newborn little girl is an answer to his prayers to Ganpati/ Ganesha, he believed this came as an possibility to express the romance towards higher power.

Select the youtube url for that scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

Despite the short notice, a project that needs a commitment of nearly 60 – 70 days, he completed this magnificent piece inside a month. Tirelessly working day and night with his team, he says “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts must be handpicked so they could fit in like a jigsaw puzzle. The most challenging and challenging part was the operation of hammering and bending the parts to get the desire shape of your body. Sourcing flat parts from various vendors added to the process of executing the work in the deadline, which however we been able to accomplish.

A 6 feet tall “The Lord Ganesha” sculpture, it’s made purely from various automobile scrap parts. These parts are almost 10 to 15 mm in thickness which are bent & welded together and meticulously shaped to restore a total metal sculpture. This Ganpati Idol has been created from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts simply to name just a few. The Mooshak (Mouse/ Undir Mama) is also produced from gears, nuts, bolts and also which has a piston block along with a wrought iron tail.
With all the 6 foot Ganpati created from automobile scrap for his client, the subsequent problem for Nishant is really a ten to eleven foot kinetic wind sculpture.