Tutorial: Tank Routine maintenance and Troubleshooting

Thank you for visiting MistHub’s Self-help guide to Tank Maintenance and Troubleshooting. Will probably like discuss the way to perform routine maintenance in your tank atomizers to keep them functioning in good shape. We’re going to also talk about some common problems and their solutions. First, let’s have a look at how to properly utilize a fresh tank or a new coil you only installed in your tank.


If you purchase a new coil you should just be sure you prime it before utilizing it. Priming a coil will assure that this wick within it is saturated with e-juice before its first use. This substantially lowers the possibility of burning your wick or damaging your coil. To prime your coil you will need to place 4-5 drops of e-juice directly into the coil head. Install the coil head by threading it into the tank’s base. You will then fill and assemble your tank. For the best results you must wait 5-10 minutes before its first use. If you’re in a rush and can’t wait the 5-10 minutes you need to a minimum of wait 1-2 minutes, close the airflow and take several deep pulls without firing your device. You should be in a position to then re-open the flow of air and employ the tank normally without issue.

Although it may seem just like a complex task a tank properly it is in reality quite easy. First of all you’ll want to maintain it clean. At least 30 days clean your tank. Begin with removing the coil(s) and any O-rings. While treatment of O-rings try to find signs of wear or any cracks. In the event the any O-rings are damaged, replace them. Clean your tank thoroughly using isopropyl alcohol or hot water along with a mild dish soap for the interior and out. Make sure you pay special care about the threads (a vintage toothbrush may help because of this part). Be sure you wash your O-rings at the same time. Rinse it away, then rinse it again only to make sure there is no soap or residue left behind. When your vape tank is totally dry you are to reassemble and employ it again.
The commonest issue tank users are confronted with is leaks. A leaky tank could be a real inconvenience but typically they’re relatively easy to correct. Ninety nine percent of the time a fish tank is leaking because it’s letting air in somewhere which breaks the vacuum that holds your e-liquid in the tank. First, go ahead and take tank apart inspecting all glass or plastic parts seeking any cracks. If you don’t use whatever, confirm the O-rings for warning signs of damage or cracks. Or no of the aforementioned mentioned parts are damaged in any way replace them when needed. Make sure you check and be sure the coil head is fully threaded into place however is not overly tight. It must be easily removable without the use of tools. Whether it is too tight it may have damaged the O-ring(s) at the base with the coil or pushed them out of place. When the O-rings around the coil are damaged replace them or even the entire coil. If the tank is constantly on the leak causing all of the above continues to be checked it can possibly be associated with a poor coil head. After a while and thru make use of the wicking materials can breakdown rather than hold just as much juice because they once did. This makes too little surface tension allowing air to sneak up through the coil in that case it must be changed.
For additional information about ijoy you can check our site: click for more info